Durability involves the reliability of materials and the reliability of construction. As far as materials are concerned, the wind-induced quality of materials is a general property of similar materials, but limited by the source of raw materials, production technology, production management level, similar materials may not have the same style. In the case of simple cement raw materials, the cement used by a small range of manufacturers is probably purchased from a cement dealer because it does not have sufficient quantities to be purchased directly from a cement plant. Distributors can not agree to the validity period of cement, even if they promise it is also groundless. A wide range of manufacturers purchase strange cement directly from the cement plant because it is large enough to purchase a batch. Even if a small range of manufacturers purchase cement from large factories, their production turnover is slow, new cement is probably in stock as "old cement". 團體地面(環氧地坪)的面層接納的是半成品，必要在工程現場加工成型，施工對風致的影響非常大。精確的施工要領才氣賦予地面應有的風致，此中人員水平、施工東西、現場辦理水平至關緊張。
The surface of group ground (floor) accepts semi-finished products, which need to be processed and formed on the site. Construction has a great impact on the wind. The precise construction essentials and talents give the ground due grace, in which the level of personnel, construction equipment, site management level is crucial.
Personnel must be familiar with the attributes of the material and the conditions under which it is used, so that it can be used accurately, including when the performance of the material bumps or changes in site conditions can be dealt with and punished accurately. Material construction integration of the enterprise has obvious advantages, so it can also be on the floor of the final product seriously, restraining the separation of the responsibility of material and construction. The construction personnel's experience is extremely tense, the site conditions change many ends, the construction personnel should be able to make a decision on the site and the basic environment, and can roughly make the corresponding response. A mature field Master operator can accumulate basic experience at one hundred thousand square meters.
Construction equipment should be comprehensive and appropriate, "if you want to do a good job, you must use the tools first." Floor construction must have some special equipment, including the site test things.
The level and experience of the management personnel are very important to the construction of the floor. On-site management personnel should be able to roughly grasp the basic state and problems of concrete, make a decision on the construction conditions and problems, such as the strength of the basic ground, humidity, flatness, etc., and can roughly make a precise response to the essentials. Handlers should also hold accurate exchanges and similarities with the relevant units so that all parties can work together effectively. For example, the construction of wear-resistant floor must be in harmony with the concrete pouring. If the wear-resistant construction is too late, the wear-resistant layer may peel off; improper concrete pouring sequence or esses will affect the subsequent crack treatment penalties. The quality will probably cause cracks on the floor.
Practical tension involves the key to planning. The differences in the utilization requirements of various building ground determine the difference of the results of the floor. The configuration unit is aware of its own environment and requirements, and then plans for the floor. The floor plan includes product selection, product mix and model selection, in which product mix has a great impact on the economy of the floor system.
In many cases, the planner has chosen the material and specifications for the floor, but discussions with the floor supplier are needed. Because the floor material and its construction are very professional, some planners may not think about it. Some floors have requirements for construction conditions and need to be elucidated.